Finally I translated my tutorial about changing/adjusting the AI-List into english. Hope you are able to understand everything. If you find any grammar, word, etc. mistakes feel free to write me a comment so I can correct it.
AI-List tutorial in german:[TUT]Ändern/Anpassen der KI-Liste/AI-List/ailist
-------------------------------------------------------------------------------
This is a „step by step“ tutorial, with which you can customize the busses driving on a map.
Fell free to post any questions or comments!
I´ve also tried to choose a structured layout.
-------------------------------------------------------------------------------
1. Where do i find the AI-List of a map?
-------------------------------------------------------------------------------
2. How is the structure of an AI-List?
[ailist]
0 ← always the same
-1 ← always the same
23 ← Number of vehicles listed in the AI-List - this includes ALL vehicles, not just the buses! (start to count with "1")
vehicles\MAN_SD200\MAN_SD77.bus
vehicles\MAN_SD200\MAN_SD80.bus
vehicles\MAN_SD200\MAN_SD81.bus
vehicles\MAN_SD200\MAN_SD82.bus
vehicles\MAN_SD200\MAN_SD83.bus
vehicles\MAN_SD200\MAN_SD83_RLB.bus
vehicles\MAN_SD200\MAN_SD84.bus
vehicles\MAN_SD200\MAN_SD85.bus
vehicles\MAN_SD202\MAN_D86.bus
vehicles\MAN_SD202\MAN_D87.bus
vehicles\MAN_SD202\MAN_D88.bus
vehicles\MAN_SD202\MAN_D89.bus
vehicles\MAN_SD202\MAN_D92.bus
vehicles\MAN_F90\AI_MAN_F90_Wechselbruecke.bus
vehicles\MB_W123_230E\AI_mb_w123_230e_cab.bus
vehicles\VW_Golf_2\AI_VW_Golf_2.bus
vehicles\VW_Golf_2\AI_VW_Golf_2.bus
vehicles\VW_Golf_2\AI_VW_Golf_2.bus
vehicles\MB_W123_230E\AI_mb_w123_230e.bus
vehicles\MB_W123_230E\AI_mb_w123_230e.bus
vehicles\MB_W123_230E\AI_mb_w123_230e.bus
vehicles\VW_T3\VW_T3_Van.ovh
vehicles\Opel_Manta_B\ai_opel_manta_b.ovh
vehicles\Citr_BX\BX.ovh
[aigroup] ← describes a group of AI-vehicles
Busses ← Displayed name of the AI-group in the editor
13 ← Number of all vehicles listed in the AI-group
0 ← busses are numbered in order - important: begin counting with "O", first vehicle in the list above is number "0" - not "1"
1
2
3
4
5
6
7
8
9
10
11
12
Spandau
-------------------------------------------------------------------------------
3. How do I change/adjust the AI-List?
Now we only want to´ve certain busses as AI-busses. In this example we will only use SD77 and SD84 as AI-busses. You can change the number and the types of busses like you want it!
Our AI-List above hast to be modiefied as follows:
[ailist]
0
-1
13 ← Adjust number of vehicles listed in AI-List
vehicles\MAN_SD200\MAN_SD77.bus vehicles\MAN_SD200\MAN_SD80.bus
vehicles\MAN_SD200\MAN_SD81.bus
vehicles\MAN_SD200\MAN_SD82.bus
vehicles\MAN_SD200\MAN_SD83.bus
vehicles\MAN_SD200\MAN_SD83_RLB.bus
vehicles\MAN_SD200\MAN_SD84.busvehicles\MAN_SD200\MAN_SD85.bus
vehicles\MAN_SD202\MAN_D86.bus
vehicles\MAN_SD202\MAN_D87.bus
vehicles\MAN_SD202\MAN_D88.bus
vehicles\MAN_SD202\MAN_D89.bus
vehicles\MAN_SD202\MAN_D92.bus
vehicles\MAN_F90\AI_MAN_F90_Wechselbruecke.bus
vehicles\MB_W123_230E\AI_mb_w123_230e_cab.bus
vehicles\VW_Golf_2\AI_VW_Golf_2.bus
vehicles\VW_Golf_2\AI_VW_Golf_2.bus
vehicles\VW_Golf_2\AI_VW_Golf_2.bus
vehicles\MB_W123_230E\AI_mb_w123_230e.bus
vehicles\MB_W123_230E\AI_mb_w123_230e.bus
vehicles\MB_W123_230E\AI_mb_w123_230e.bus
vehicles\VW_T3\VW_T3_Van.ovh
vehicles\Opel_Manta_B\ai_opel_manta_b.ovh
vehicles\Citr_BX\BX.ovh
[aigroup] ← You can keep this group - Details below!
Busses
13
0
1
2
3
4
5
6
7
8
9
10
11
12
Spandau
[aigroup]
Beispiel
2 ← number of vehicles in AI-group - here SD77 and SD84 -->2!
0
1
Example
The 1st AI-group must not be deleted , you can keep it. If you keep it, you´ve to choose the appropriate AI-group in the editor (Pictures below!), otherwise all vehicles that are listed in the first AI-group would drive as bus traffic - the first 13 vehicles (whether car, truck, bus, etc.) would be used for scheduled bus transport. [/ align]
-------------------------------------------------------------------------------
4. How do I assign busses certain repaints?
After we have determined certain types of buses for the AI-traffic, wewill define certain advertisements/repaints. For this we´ll proceed as follows:
hint: The vehicle numbers are taken from the Berlin Spandau map and are used as example!
[aigroup_depot] ← "keyword" for a vehicle group
Hof Spandau ← Name of the group and name of the group in the editor
Spandau
[aigroup_depot_typgroup] ←"Keyword" for a “sub” vehicle group
0 ← number of busses – begin counting from „0“ – in this case number “0” is the SD77
2814 ← vehicle number of the bus
Schultheiss ←name oft he repaint, which will used fot the bus with this vehicle number – the repaint must exist in the repaint folder of the bus!
2816
Lotto Toto Spiel 77
2820
Cosy-Wasch (P, alt)
2821
Wodka Gorbatschow
2828
Schultheiss
[end] ←end of „sub“ vehicle group
Now it would be the same for the SD84.
-------------------------------------------------------------------------------
5. How do I assign vehicle groups to bus lines?
Open the map in the Omsi-Editor. Klick on the buttons which are marked in the pictures.
It´s important to choose the right line! After that we choose our AI-Group under "AI-Veh.-Group" and save the map. Now there should be your “wished” traffic on the map.
-------------------------------------------------------------------------------
small addition: How do I assaign repaints to certain lines (german only!)? --> Ailist: Repaints den einzelnen Linien zuordnen
-------------------------------------------------------------------------------
Extended explanation of the AI-groups
An aigoup / AI-group describes a group of vehicles. AI-groups can be assigned to specific lines or other tracks & trips. If you want to use only certain vehicles on a track, you summarize these vehicles in an AI-group and assign the track this AI-group.
On lines AI-groups are necessary! All lines need an AI-group (of course it doesn’t has to be the same on all lines – with that it is possible to choose certain busses for certain lines!)
Example:
Only the SD77 should drive on a certain line.
For this we create a new AI-group:
[aigroup]
SD77 ← Name of aigroup / group appears with this name in the Omsi Editor – of course you can choose a different name
1 ← in this AI-group is only one bus
0 ← Bus is number „0“ , so in this example the SD77
Grundorf
Now open the map in the Omsi Editor, klick on "tracks and trips", "edit timetable" and choose your desired line, on which only this bus/your chosen busses should drive.After that choose under aigroups the group “SD77” (or your respective group), save and you are finished.
-------------------------------------------------------------------------------
known problems/errors
[align=center]►► Loading screen stops at "Loading map and creating new situation"
It may happen that after the allocation of repaints to vehicle numbers (step 4) the loading screen stops at “Loading map and creating new situation”.
[align=center]Solution: (thanks to Setra S 416
ZitatThe reason for this is, that the AI-group has been changed in the Windows Editor. Therefore the Omsi Editor can´t find the group anymore.
To solve the problem:
Add new group in the Windows Editor (can be the same, but it needs to have a DIFFERENT NAME!)
Choose new group in the Omsi Editor
Delete old group in the Windows Editor
[align=center]Otherwise you can create a repaint structure like Marc1972 it did in his “Rheinhausen repaint pack (autarke Installation)”.