Hast du Scripts im Script-Ordner eingefügt?
Bustec Monitor vom LE in den Facelfit/Facelift G einbauen [Selbsteinbauanleitung]
Das Forum befindet sich im reduzierten Betrieb. Die Addon- und Supportforen bleiben weiterhin verfügbar.
Bitte beachte, dass OMSI nicht mehr weiterentwickelt wird. Ein Teil der Entwickler widmet sich inzwischen der Entwicklung eines neuen Simulators. Weitere Informationen zum LOTUS-Simulator findest Du hier.
Bitte beachte, dass OMSI nicht mehr weiterentwickelt wird. Ein Teil der Entwickler widmet sich inzwischen der Entwicklung eines neuen Simulators. Weitere Informationen zum LOTUS-Simulator findest Du hier.
-
-
ja auch vorhanden
-
Hallo,
ich habe folgendes Problem.
Ich habe den Monitor erfolgreich im Gelenkbus eingebaut und er startet auch.
Nur wenn ich eine Linie eingebe und einen Kurs passiert dann das mit dem Monitor
Hat jemand eine Idee woran das liegen könnte?Mit freundlichen Gruß Lars
-
Mach ma die Elektrik und Motor komplett aus und starte alles danach wieder
-
Mach ma die Elektrik und Motor komplett aus und starte alles danach wieder
okay ich versuche es
-
Moin habe da leider ein Problem... der Bus ist unsichtbar leider Finde ich aber keinen Fehler in den Angegebenen Linien.
Logfile:
154 12:57:58 - - Error: In "vehicles\MB_O530_G_Modded\model\model_O530 G CNG.cfg" there was an error in line 506!
155 12:57:58 - - Error: In "vehicles\MB_O530_G_Modded\model\model_O530 G euro2 Trail.cfg" there was an error in line 137!
156 12:58:08 - - Error: Fehler: im Befehl "(M.L.TFT_frame)" (vehicles\MB_O530_G_Modded\\script\O530G_main.osc) ist der Macroname ungültig!
157 12:58:08 - - Error: Fehler: im Befehl "(M.L.TFT_init)" (vehicles\MB_O530_G_Modded\\script\O530G_main.osc) ist der Macroname ungültig!
158 12:58:08 - - Error: In "vehicles\MB_O530_G_Modded\model\model_O530 G CNG.cfg" there was an error in line 506!
159 12:58:09 - - Error: In "vehicles\MB_O530_G_Modded\model\model_O530 G euro2 Trail.cfg" there was an error in line 137!
160 12:58:10 - - Warning: Direct3D-Device lost!
161 12:58:10 - - Information: Direct3D-Device resetted!
162 12:58:10 - - Information: Reset State Matrices...
163 12:58:10 - - Information: Start Tex Thread...
164 12:58:10 - - Information: Init Red Line...
165 12:58:10 - - Information: Set Initial Render States...
166 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
167 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
168 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
169 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
170 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
171 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
172 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
173 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
174 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
175 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
176 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
177 12:58:10 - - Information: Crash: Vehicle 576 (vehicles\MB_O530_G_Modded\MB_O530 G CNG ZF Trail.bus) was crashed and left its path
178 12:58:11 - - Warning: Soundfile vehicles\MB_O530_G_Modded\sound-citaro\SD_lautsprech_rausch.wav does not exist!
179 12:58:11 - - Warning: Soundfile vehicles\MB_O530_G_Modded\sound-citaro\SD_lautsprech_Motor@592.wav does not exist!
180 12:58:16 - - Warning: Error while loading file vehicles\HH109_KIPKW5\\..\..\Scripts\AI_Cars\collision_hupe_varlist.txt
181 12:58:16 - - Warning: Error while loading script file vehicles\HH109_KIPKW5\\..\..\Scripts\AI_Cars\collision_hupe.osc
182 12:58:16 - - Warning: Did not find texture file "HH109_Kennz.bmp"!
183 12:58:29 - - Warning: Error while loading file vehicles\HH109_KIPKW1\\..\..\Scripts\AI_Cars\collision_hupe_varlist.txt
184 12:58:29 - - Warning: Error while loading script file vehicles\HH109_KIPKW1\\..\..\Scripts\AI_Cars\collision_hupe.osc
185 12:58:29 - - Warning: Did not find texture file "HH109_Kennz.bmp"!Bitte um Hilfe
MfG
Noah
-
-
Welchen teil den ?
OSC Datei:
'########################################
'# #
'# MAIN SCRIPT #
'# #
'# MAN Standarddoppeldecker SD200 #
'# #
'# Bauart SD85 #
'# #
'########################################'(c) 10.08.2009 Marcel Kuhnt, Rüdiger Hülsmann
'Script Version: 1.0
'Omsi release: 1.0'Revision History:
'- Marcel Kuhnt 10.08.2009 Added Revision History
'- Marcel Kuhnt 30.11.2010 Bugfix: press [D] in AI mode if motor running but neutral'------------------------------------------------------------------------------------------
'######################
' Hauptteil
'######################{init}
(M.L.engine_Init)
(M.L.Antrieb_Init)
(M.L.Elec_Init)
(M.L.Door_Init)
(M.L.wiper_init)
(M.L.lights_init)
(M.L.bremse_init)
(M.L.cockpit_init)
(M.L.heizung_init)
(M.L.Matrix_init)
(M.L.IBIS_init)
(M.L.Collision_Init)
(M.L.articulation_init)
(M.L.VDV_init)
(M.L.ticketprinter_init)
(M.L.TFT_init)
1 (S.L.Daueranimation)
{end}{frame}
(M.L.Engine_Frame)
(M.L.Antrieb_Frame)
(M.L.Elec_Frame)
(M.L.Door_frame)
(M.L.cockpit_frame)
(M.L.lights_frame)
(M.L.wiper_frame)
(M.L.Auspuff_Frame)
(M.L.bremse_frame)
(M.L.klappern_frame)
(M.L.FF_frame)
(M.L.rain_frame)
(M.L.dirt_frame)
(M.L.sound_volume_frame)
(M.L.heizung_frame)
(M.L.IBIS_frame)
(M.L.Matrix_frame)
(M.L.wimpel_frame)
(M.L.articulation_frame)
(M.L.VDV_frame)
(M.L.ticketprinter_frame)
(M.L.cashdesk_frame)
(M.L.TFT_frame)'AI:
(L.L.AI_Engine) 0.5 >
(L.L.engine_on) 0.5 <
(L.L.antrieb_getr_gangvorwahl) 4 = !
&&
{if}
0 (S.L.bremse_feststell_sw) (S.L.bremse_feststell)
1 (S.L.engine_injection_on) (S.L.elec_busbar_main_sw)
400 (S.L.engine_n)
4 (S.L.antrieb_getr_gangvorwahl)
1 (S.L.engine_on) (S.L.vdv_on) (S.L.cp_key_pull)
3 (S.L.key_mode)
0.4 (S.L.cp_key_rot)
900000 (S.L.bremse_p_tank01) (S.L.bremse_p_tank02) (S.L.bremse_p_tank03) (S.L.bremse_p_tank04) (S.L.bremse_p_leitung01) (S.L.bremse_p_leitung02)
400000 (S.L.bremse_p_balg_0_R) (S.L.bremse_p_balg_0_L) (S.L.bremse_p_balg_1_R) (S.L.bremse_p_balg_1_L)
(T.L.ev_engine_ingnition)
{endif}(L.L.AI_Engine) -0.5 <
(L.L.engine_on) 0.5 >
&&
{if}
0 (S.L.engine_on)
0 (S.L.engine_injection_on)
1 (S.L.bremse_feststell_sw) (S.L.bremse_feststell)
2 (S.L.key_mode)
0.2 (S.L.cp_key_rot)
(T.L.ev_engineshutdown)
{endif}(L.L.AI)
{if}
(L.L.Brake) (C.L.max_bremskraft) * (S.L.Brakeforce)
{endif}{end}
'----------------------------------
'Crash:{trigger:collision}
(M.L.Collision_Trigger)
{end}'----------------------------------
'malfunction reset:{trigger:malfunction_reset}
1.0 (S.L.elec_V_battery)
(M.L.Collision_Malfunction_Reset)
(M.L.Elec_Malfunction_Reset)
(M.L.lights_repair)
(C.L.Fehlertoleranz) (L.L.wearlifespan) * random (S.L.EBS_Error_dist)
(C.L.Fehlertoleranz) (L.L.wearlifespan) * random (S.L.Retarder_Error_dist)
(C.L.Fehlertoleranz) (L.L.wearlifespan) * random (S.L.Gear_Error_dist)
(C.L.Fehlertoleranz) (L.L.wearlifespan) * random (S.L.ECAS_Error_dist)
(C.L.Fehlertoleranz) (L.L.wearlifespan) * random (S.L.EDC_Error_dist)
(C.L.Fehlertoleranz) (L.L.wearlifespan) * random (S.L.Battery_Error_dist)
(C.L.Fehlertoleranz) (L.L.wearlifespan) * random (S.L.Brakedisc_Error_dist)
(C.L.Tuerfehlertoleranz) (L.L.wearlifespan) * random (S.L.Door_Error_Count)
(C.L.Tuerfehlertoleranz) (L.L.wearlifespan) * random (S.L.Door2_Error_Count)
(C.L.Tuerfehlertoleranz) (L.L.wearlifespan) * random (S.L.Door3_Error_Count)
(C.L.Tuerfehlertoleranz) (L.L.wearlifespan) * random (S.L.Door4_Error_Count)
60 (S.L.engine_temperature)
{end}'----------------------------------
'malfunction time calc:{trigger:malfunction_gettime}
0 s0
(M.L.Collision_Malfunction_TimeCalc)
(M.L.Elec_Malfunction_TimeCalc)
(M.L.lights_repair_timecalc)
l0
{end}Door_varlist:
door_0
door_1
door_2
door_3
door_2f
door_3f
door_4
door_4f
door_5
door_5f
door_6
door_7
doorTarget_0
doorTarget_1
doorTarget_23
doorTarget_23_delayed
doorTarget_45
doorTarget_67
doorSpeed_0
doorSpeed_1
doorSpeed_2
doorSpeed_3
doorSpeed_4
doorSpeed_5
doorSpeed_6
doorSpeed_7
doorMaxSpeed_0
doorMaxSpeed_1
doorMaxSpeed_2
doorMaxSpeed_3
doorMaxSpeed_4
doorMaxSpeed_5
doorMaxSpeed_6
doorMaxSpeed_7
doorMaxSpeed_0_norm
doorMaxSpeed_1_norm
doorMaxSpeed_2_norm
doorMaxSpeed_3_norm
doorMaxSpeed_4_norm
doorMaxSpeed_5_norm
doorMaxSpeed_6_norm
doorMaxSpeed_7_norm
doorAcc_0
doorAcc_1
doorAcc_2
doorAcc_3
doorAcc_4
doorAcc_5
doorAcc_6
doorAcc_7
doorRefl_0
doorRefl_1
doorRefl_2
doorRefl_3
doorRefl_4
doorRefl_5
doorRefl_6
doorRefl_7
bremse_halte
bremse_halte_sw
doorAftLastOpen
haltewunsch
haltewunschlampe
door_handsteuerung
door_haltewunsch_knopfdruck
door_kinderwagenwunsch
door_AI_timer
door_light_1
door_light_2
door_light_3
door_light_4
door_20h_sw
door_freigabe
doorAftLastOpen
doorAftLastOpen1
doortimer23
doortimer45
doortimer67
doorwarn
doorwarn2
doorwarn3
trigger_antirepeat23
trigger_antirepeat45
trigger_antirepeat67
tuerverzoegerung
bus_dooraft_sw
light_timer1
light_timer2
light_timer3
light_timer4
door_spotlight_1
door_spotlight_2
door_spotlight_3
door_spotlight_4
tuersperre
tuersperre_sw
cp_tuersperre
bus_dooraft_sw
tueroeffnung
HST_Bremse_aktiv
Freigabe
exit1_lichtschranke
exit2_lichtschranke
exit3_lichtschranke
schulfahrschaltung
bremse_halte_switch
bus_doorall
doorall_light
doorall_pressed
zufall_kinderwagenwunsch
mecker_timer
tuerfehler_blinkgeber
lichtschranke_gestoert
lichtschranke_befehl
lichtschranke_gestoert_BVG
lichtschranke_befehl_BVGexit_triggering_blocked
exit45_triggered
exit67_triggeredDoor_01_nothahn_sw
Door_01_nothahn
Door_23_nothahn_sw
Door_23_nothahn
Door_45_nothahn_sw
Door_45_nothahn
Door_67_nothahn_sw
Door_67_nothahndoorDragAcc_0
doorDragAcc_1
doorDragAcc_2
doorDragAcc_3
doorDragAcc_4
doorDragAcc_5
doorDragAcc_6
doorDragAcc_7
door_0_soll
door_1_soll
door_2_soll
door_3_soll
door_4_soll
door_5_soll
door_6_soll
door_7_soll..........
Daueranimation
. -
Ok ist doch richtig. Scripts eingefügt?
-
Jo ist gemacht. Also der FloFix Ordner.
-
ja. Haste auch Pfade zu den Scripts in der Busdatel geändert?
-
hat geklappt
Leider habe ich oben Links ein weisses Feld -
Schritt 2 war es glaube ich.
-
Leider habe ich oben Links ein weißes Feld.
sonst geht es jetzt wie bekomme ich das weg -
Könntest du mir ein Bild zeigen?
-
-
Hast du alle Texttexturen geändert?
-
Ich habe versucht den in den Citaro Ü eingebaut könntest mir einer sagen was ich falsch gemacht habe ich weiss der ist nur für denn Facelift eine Anleitung aber vielleicht weiss das ja einer ?
-
du hast vergessen die Texttexturen anzupassen
-
was meinst du damit habe es im Model angepasst oder meinst du im Textur ordner sorry für die Frage stelle mich ein Bisschen blöd an
hat sich erledigt hab mich nur blöd angestellt