Beiträge von GameplayHD2015

Scania Citywide GN14 nach Soundupdate installieren kommt eine zweite in menu:Cirywide GN14 ZF-6Hp aber wenn ich drucke ok,passiert nicht,ich sehe kein buss aber in menu kann ich position ändern,trotzdem kein bus!

Ja ich glaub hab ich gemacht,ist bischen heller als die originale SweetFX einstellung!

Vielen dank!

Ich wurde fragen ob ist normal vorne weiss und seite so gelb/beije?

http://prnt.sc/cqlfkg

Zitat von Morphi

Im Grunde genommen, nehme ich eigentlich momentan keine Wünsche an. Und wenn, dann nur Düsseldorf und Umgebung und natürlich vorausgesetzt, es gibt genügend Bildmaterial.

Spoiler anzeigen

/*-----------------------------------------------------------.
/ Choose effects /
'-----------------------------------------------------------*/

// Set to 1 for ON or 0 for OFF
#define USE_SMAA_ANTIALIASING 0 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique.
#define USE_FXAA_ANTIALIASING 0 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique. WIP - Currently only works in DX9 and you need to use the FXAA injector dlls.
#define USE_EXPLOSION 0 //[0 or 1] Explosion : Scatters the pixels, making the image look fuzzy.
#define USE_CARTOON 0 //[0 or 1] Cartoon : "Toon"s the image. (Interferes with SMAA, CRT, Bloom, HDR and Lumasharpen)
#define USE_ADVANCED_CRT 0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. (Interferes with SMAA, Cartoon, Bloom, HDR and Lumasharpen, and it has a very high performance cost)
#define USE_BLOOM 0 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost)
#define USE_HDR 0 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost)
#define USE_LUMASHARPEN 0 //[0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that.
#define USE_LEVELS 0 //[0 or 1] Levels : Sets a new black and white point. This increases contrast but causes clipping. Use Curves instead if you want to avoid that.
#define USE_TECHNICOLOR 0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4)
#define USE_DPX 0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor.
#define USE_MONOCHROME 0 //[0 or 1] Monochrome : Monochrome makes the colors disappear.
#define USE_LIFTGAMMAGAIN 1 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights
#define USE_TONEMAP 0 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping)
#define USE_VIBRANCE 0 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
#define USE_CURVES 0 //[0 or 1] Curves : Contrast adjustments using S-curves.
#define USE_SEPIA 0 //[0 or 1] Sepia : Sepia tones the image.
#define USE_VIGNETTE 0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts.
#define USE_DITHER 1 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette)
#define USE_BORDER 0 //[0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes.
#define USE_SPLITSCREEN 0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode.

#define USE_CUSTOM 0 //[0 or 1] Custom : Write your own shader by editing custom.h, and then enable it here.

/*-----------------------------------------------------------.
/ Lift Gamma Gain settings /
'-----------------------------------------------------------*/
#define RGB_Lift float3(0.9, 0.9, 0.9) //[0.000 to 2.000] Adjust shadows for Red, Green and Blue.
#define RGB_Gamma float3(1.0, 1.0, 1.0) //[0.000 to 2.000] Adjust midtones for Red, Green and Blue
#define RGB_Gain float3(1.25, 1.25, 1.25) //[0.000 to 2.000] Adjust highlights for Red, Green and Blue

//Note that a value of 1.000 is a neutral setting that leave the color unchanged.

/*-----------------------------------------------------------.
/ Dither settings /
'-----------------------------------------------------------*/
#define dither_method 1 //[1 or 2] 1 = Ordered dithering (very good and very fast), 2 = Random dithering (different but slightly slower dithering)

//Note that the patterns used by Dither, makes an image harder to compress.
//This can make your screenshots and video recordings take up more space.

Alles anzeigen

ok..i suppose that those are the SweetFX settings,how should i adde them to my SweetFX settings?

Could you share with me your SweetFX settings?

hmm..ich hab Steam version,wie kann ich das machen?ich hab über 100 GB Dateien in mein OMSI Folder,ich will das nicht verloren!

Hallo,

ich hab vor kurz Belen karte installiert,jetzt überall,egal welche karte ich lade,die haben Bushaltestelle Zeichen von Belen Map,in turkisch...
Wie kann ich das ändern?

http://prnt.sc/cqlykh

VIelen dank

ich hab das gemacht,jetzt Omsi 2 funktioniert nicht mehr,ladet keine Karten:

Zugriffsverletzung bei Adresse 00642AE2 in Modul ´OMSI.exe´.Lesen von Adresse 0000001C

Was soll ich machen jetzt?

Super,alles erledigt!
Kannst du mir sagen bitte wie kann ich die Bushaltstelle Zeichen wechseln?ich hab die von Belen in Turkisch in alle Karten und ich will das nicht!

Ich hab die 4 Objekte fehlende:

Sceneryobjects\Planetgamefreaks\Rutsche.sco
Sceneryobjects\Planetgamefreaks\Schaukel.sco
Sceneryobjects\rumpelhans104\Bruecke_beton_400m.sco
Sceneryobjects\WSWdepot\depot.sco

WSW Depot link sind ausgefallen,ich weiss nicht sicher welche addon sind die,kannst du mir helfen bitte?Danke

Hallo?

Wie kann ich ändern die Bushaltstellezeichen?

After 2 years playing OMSI2.with both original and more than 30 different installed maps,hundreds hours spended with this amazing simulator i can say this map is from far THE BEST MAP created untill now,better than original DLC´s as Hamburg Tag&Nacht or Gladbeck which by the way are Paymare Add-On´s...this map should have a price,not others!
DOES NOT affect PC performance at all,graphics and details are amazing,the lines are very interresting,you can not get bored on this map!
I see it here for more than a year,i first thought is a stupid map but after testing it,i can not play on another map,is absolutelly AMAZING!

Congratulations to the creator/creators and i think they should receive some donations for this work,they really deserve it!

19lars89 gleiche problem bei mir auch...allen Karten mit Bushaltstelle in Turkisch!

Geht nicht herunterladen,ist ein virus oder sowas,offnen 10 mal mit casino spiele und mehrer

Ta

Zitat von Tarik K.

Wie war das nochmal mit Solobussen in Krummenaab

[IMG: http://www.shapeloft.com/imageupload/2016/09/12/0/image-414108-1bce6b97.jpg]

[IMG: http://www.shapeloft.com/imageupload/2016/09/12/0/image-414109-8e2d2df8.jpg]

[IMG: http://www.shapeloft.com/imageupload/2016/09/12/0/image-414110-f33a0cb4.jpg]

[IMG: http://www.shapeloft.com/imageupload/2016/09/12/0/image-414111-60983b2e.jpg]

MB O530 Citaro 2G XXL
Krummenaab Updated

Alles anzeigen

Tarik K. wo kann ich diese bi gelenk mod herunterladen?

Thanks,now works..what a strange error

and what is exactly what i have to do?in which folder i have to go¿

i have no X10 Addon installed

i did not really understand what i have to do...can you guys in english tell me please?where exactly to go and what to do!
thanks

Wieder installiert,gleiche Problem:

Logfile: