Thanks a whole heap! And thanks for understanding the question, of course I only meant the folders.
Now, time to do some swedish mapping!
No problem! And if you'll need any help with creating your map, let me know
Thanks a whole heap! And thanks for understanding the question, of course I only meant the folders.
Now, time to do some swedish mapping!
No problem! And if you'll need any help with creating your map, let me know
Here is a complete list of original OMSI 2 files in the folders you mentioned
Sceneryobjects:
- Agriculture
- Animals
- Buildings_DDR_RUE
- Buildings_JHY
- Buildings_MC
- Buildings_RUE
- Generic
- Kreuz_MC
- Kreuz_RUE
- Railroad_RUE
- Railroad_MC
- Ruede
- Static_Vehicles_RUE
- Streetobjects_MC
- Streetobjects_RUE
- Trees_MC
- Verkehrszeichen_MC
- Verkehrszeichen_RUE
Splines:
- Marcel
- Marcel CH
- Ruede
- Invis_sidewalk (text file)
Maps:
- Grundorf
- Berlin-Spandau
Seid dem ich den Mod installiert habe für den NG gibts nur Fehler
Haben Sie den Soundmod von Morphi für MAN NG272 installiert? It will cause errors if you did, so please refer to the manual installation instructions. If you will still have problems please post an image of the error.
UPDATED! Download hotfix for version 1.3 in first post.
The stop request sound mod for the SD202 buses will be available this Sunday. It will be possible to install the mod for individual SD202 buses, so installing it for all of them isn't going to be mandatory.
Lol, I worked it out. You just put the spline below the surface, specify the Terrain behaviour from the drop down list then you have to refresh by saving the map
Thank you for posting your finding
Although this mod isn't very realistic (the BVG NG272s didn't have stop request sounds back then), I find this mod to be absolutely brilliant. Thank you very much!
However, you might want to alter the readme file: Most of the users who have Morphi's soundpack only edit the MAN_GN92zf_main.bus file. You should point out that it doesn't work if you don't also edit the MAN_GN92_main.bus and MAN_EN92_main.bus files.
Other than that, fantastic work, mate.
Thank you
Display MoreIt still gives these errors, but it works, though...
BTW, I only applied it into the NL202 EN92. Now there's still the normal doors mod
You have to install the mod for both buses, because they use the same door script file. This error occurs when the NG272 cannot find the stop_request.osc script file, because it is not specified in it's .bus file
Thank you very much for the LPP repaints
UPDATED! Download link in first post.
Right, I can confirm the issue as well although I have no error messages at all, only it is just not working when the AI presses the button. If I press, then it works. I have only the Morphi's sound mod installed.
Tested both buses (since Morphi's mod add a ZF version to the list), neither of them works.It was a complete silence when the AI hit the stop signal, heard no sound at all.
I am now aware of this problem. I've been trying to fix it for the past hour. M&R have changed some code in OMSI 2 so now i have to find out how to script this correctly. The back door now works (the buzzer sounds when AI passengers press the button), but the 2nd door doesn't
EDIT: mod is now fixed. I am re-uploading it now (hopefully for the last time
I have also the problem that there is no sound when ai presses the button.
Sometimes following error occur:
Do you have any other mods installed? For example the sound mod by Morphi.
when ai push the stop button No sound...only sound when press manual the stop request.
I will try to find the problem when i come home.
The point is that Morphi has his own sound files and your files are not overwriting each other, so I have no idea what is wrong. Any guess?
Morphi has created new cfg files for his sounds. So to make this mod compatible you need to do the following steps:
1. Go to the sound folder of the bus you modified (''MAN_NL_NG'') and open the ''sound_GN92zf_M.cfg'' file.
2. Scroll down to the end of the file and add:
++++++++++++
[sound]
StopRequest.wav
1
[3d]
-0.65
5.35
1.6
0.5
[trigger]
stop_request_sound
3. Save and close
4. Now open ''MAN_GN92zf_main.bus''
5. Scroll down to the ''[script]'' section and to the end add ''script\stop_request.osc''. Now you must also change the number of scripts to 27. It must now look like this:
[script]
27
script\man_GN92_main.osc
script\man_GN92_main_AI.osc
script\collision.osc
script\cockpit.osc
script\antrieb_D854_GN.osc
script\engine_GN.osc
script\elec.osc
script\bremse_GN92.osc
script\auspuff.osc
script\lights.osc
script\door-3.osc
script\wiper.osc
script\klappern.osc
script\forcefeedback.osc
script\rain.osc
script\dirt.osc
script\sound_volume.osc
script\heizung.osc
script\IBIS-2.osc
script\VMatrix.osc
script\wimpel.osc
script\cashdesk.osc
script\ticketprinter.osc
script\articulation.osc
script\ramplift.osc
script\spray.osc
script\stop_request.osc
6. Save and close.
Make sure you copyed all the other provided files to the right folders (they are located in the archive in the folder Manual Installation). More in readme file.
Let me know if this works
Type of download: Bus modification
Details:
This mod adds a buzzer sound, which is activated when a passenger presses the STOP button. This modification is only for the MAN NL202 and NG272 made by M&R.
Installation:
Copy the 'vehicles' folder from the archive into your OMSI Install directory and overwrite everything. Remember to make a backup first in case you would like to remove the mod later.
DOWNLOAD v1.4
UPDATE December 16th - fixed bug: buzzer now sounds when AI passengers press the STOP button (reinstall mod/overwrite everything)
UPDATE January 24th - fixed bug: buzzer now sounds only once, even if the button is pressed again in the trailer part of the bus (hotfix).
Coming soon: Stop request sound mod for SD202 buses + demonstration video
DOWNLOAD HOTFIX FOR VERSION 1.3
If you are downloading the mod for the first time this fix is not required!
To make this mod compatible with Morphi's sound pack you need to follow the manual installation instructions located in the readme file.
Please do not re-upload this mod on any other website or forum!
Enjoy and feel free to leave a comment
Well if i change the icon size to small it is displayed correctly.
Here is another error that appears when i close OMSI, but i think Marcel and Rudiger already know about it.
My screen resolution is 1920 x 1080. I use a normal LCD display.
The start button is hidden behind the description box as shown in the image below. It's not a major bug, but hopefully it will be fixed in the upcoming patch
For me all the announcements start
working in the year 1992 when line 5 was re-numbered to 130.
Well i was just a bit disappointed by the finished product. Hopefully they will solve all the issues in the coming weeks. And maybe they could assign more moderators to the english area. Just a suggestion
I am just pointing out what the issues are here. I may have overreacted a bit, but sorry that doesn`t mean you can compare me to a 12 year old just because i am expressing my thoughts and opinions. I'll once again give a chance to Marcel and Rudiger. I've been playing omsi since day one and i know they can do better. But please, telling people that none of these bugs were found in the test phase of development, I find that highly unlikely. And im not going to write again about the poor communication with the english community because my previous post pretty much sums up things as they really are.