Art des Downloads: Bus-Mod
Projektname: Lion's City DD - Mod für OMSI 1.04
Beteiligte Personen: nur ich (Manu)
Copyright: Der Mod darf weiterverwendet werden, wie man will. Das war jetzt keine große Arbeit
Projektdetails:
Auch wenn es mir so vorkommt, als wär ich der einzige, der mit dem Update auf Version 1.04 zufrieden ist, stelle ich mal zwei kleine Mods für den Lion City DD hoch.
Der Mod besteht aus drei Teilen.
This mod consists of three parts.
Nicht-steckenbleibender Rückspiegel
Damit beim Bremsen etc. der linke Rückspiegel nicht stehen bleibt: In der .bus-Datei eures Lion City DD
For non-stopping mirrors while braking etc. you can replace
zu
by
ändern.
in the .bus file of your Lion's City DD.
Analog dazu kann man übrigens auch die Rückspiegel von anderen Bussen "korrigieren".
It's possible to correct the mirrors of other buses in a similar way.
2. und 3. Tür unabhängig voneinander öffnen/schließen lassen
Dieser Mod ist nicht zu anderen Mods kompatibel, die eine andere door.osc-Datei verwenden!
Damit sich die zweite und dritte Tür unabhängig voneinander öffnen/schließen, muss folgendes verändert werden:
1. In passengercabin_DL05.cfg im Ordner Model
This Mod is incompatible with other mods that also use another door.osc file!
If you want the doors to open and close independently you need to change the following:
1. In passegnercabin_DL05.cfg in the folder Model replace
zu
by
ändern.
2. In door_varlist.txt im Ordner Script die folgenden Zeilen hinzufügen:
2. In door_varlist.txt add the following lines:
3. In der cfg-Datei im Ordner Model
3. In the cfg file in the folder Model replace
- -----------------------------------------
- [mesh]
- DL_Generic\DL_Türbügel_MR.o3d
- [newanim]
- origin_trans
- 1.199
- 2.039
- 1.375
- origin_rot_y
- -90
- anim_rot
- door_2
- 90
- -----------------------------------------
- [mesh]
- DL_Generic\DL_Türbügel_ML.o3d
- [newanim]
- origin_trans
- 1.199
- 0.692
- 1.372
- origin_rot_y
- -90
- anim_rot
- door_2
- -90
zu
by
- -----------------------------------------
- [mesh]
- DL_Generic\DL_Türbügel_MR.o3d
- [newanim]
- origin_trans
- 1.199
- 2.039
- 1.375
- origin_rot_y
- -90
- anim_rot
- door_1
- 90
- -----------------------------------------
- [mesh]
- DL_Generic\DL_Türbügel_ML.o3d
- [newanim]
- origin_trans
- 1.199
- 0.692
- 1.372
- origin_rot_y
- -90
- anim_rot
- door_1
- -90
ändern.
4. Die Datei door.osc herunterladen (wieder der Download-Button mit dem kleinen grünen Pfeil) und im Ordner Script einfügen und damit die alte door.osc ersetzen.
WICHTIG: Backup erstellen, bevor ich wieder Ärger bekomme...
4. Download this door.osc (it's the download button with the small green arrow) and put it in the folder Script.
IMPORTANT: Please remember to create backup files!
Manuelle Steuerung für die 2. und 3. Tür (funktionierende Kinderwagenschalter) und Türflügelsperre
Dieser Teil setzt den zweiten Mod hier voraus! Wer die door.osc vor dem 26.05.2013 15:23 Uhr heruntergeladen hat, lädt bitte nochmal die aktuelle Datei herunter. In door_varlist.txt sind auch neue Variablen hinzugekommen. Ich kann nicht sagen, wie sich der Mod mit anderen Mods verträgt. Dieser Mod enthält außerdem einen Bug, dass, wenn der 2. Türflügel nicht öffnet, die Fahrgäste von hinten kommen und keine Fahrkarte kaufen wollen, sie nicht einsteigen (Probiert es aus und ihr seht, was ich meine). Da ich absolut keine Erklärung für dieses Problem habe (möglicherweise ein OMSI-Bug), wird dieser Bug wohl auch nicht mehr behoben.
Alle jetzt folgenden Änderungen müssen in der .cfg-Datei im Model-Ordner durchgeführt werden:
This part requires the second mod! If you downloaded the door.osc before 26th May 2013 3.23 pm (CEST) please download the latest file. There are also new variables in door_varlist.txt. I can't tell you wether this mod works with other mods. This mod also contains a bug. If you block the 2nd door half and if the passengers are coming from the back and they don't want to buy a ticket they won't get on (Try it out and you'll see what I mean). I have absolutely no explanation for this problem (probably an OMSI bug) and so that bug won't be fixed.
The following changes must all be done in the cfg file in the Model folder:
1.
1.
muss verändert werden zu
must be changed to
2.
2.
- [mesh]
- DL_Generic\DL_Panel_Tür2.o3d
- [viewpoint]
- 3
- [matl_change]
- schalter.bmp
- 0
- lights_stand
- [matl_item]
- [matl_nightmap]
- schalter_LM.bmp
- [mouseevent]
- bus_doorfront1
- [newanim]
- origin_from_mesh
- anim_rot
- cockpit_tuertaster2
- -4
- [mesh]
- DL_Generic\DL_Panel_Tür3.o3d
- [viewpoint]
- 3
- [matl_change]
- schalter.bmp
- 0
- lights_stand
- [matl_item]
- [matl_nightmap]
- schalter_LM.bmp
- [mouseevent]
- bus_doorfront2
- [newanim]
- origin_from_mesh
- anim_rot
- cockpit_tuertaster3
- -4
muss verändert werden zu
must be changed to
- [mesh]
- DL_Generic\DL_Panel_Tür2.o3d
- [viewpoint]
- 3
- [matl_change]
- schalter.bmp
- 0
- lights_stand
- [matl_item]
- [matl_nightmap]
- schalter_LM.bmp
- [mouseevent]
- cp_schalter_kinderwagen
- [newanim]
- origin_from_mesh
- anim_rot
- door_handsteuerung
- -4
- [mesh]
- DL_Generic\DL_Panel_Tür3.o3d
- [viewpoint]
- 3
- [matl_change]
- schalter.bmp
- 0
- lights_stand
- [matl_item]
- [matl_nightmap]
- schalter_LM.bmp
- [mouseevent]
- cp_schalter_kinderwagen2
- [newanim]
- origin_from_mesh
- anim_rot
- door_handsteuerung2
- -4
3.
3.
muss verändert werden zu
must be changed to
4.
4.
- [mesh]
- DL05\DL05_Tür_V_R.o3d
- [newanim]
- origin_trans
- 1.227
- 6.260
- 0
- origin_rot_x
- 0
- origin_rot_y
- -90
- origin_rot_z
- 0
- anim_rot
- door_0
- 172
- [newanim]
- origin_trans
- 1.212
- 6.591
- 0
- origin_rot_x
- 0
- origin_rot_y
- -90
- origin_rot_z
- 0
- anim_rot
- door_0
- -83
- [mesh]
- DL05\DL05_Tür_V_R_Aussenscheibe.o3d
- [newanim]
- origin_trans
- 1.227
- 6.260
- 0
- origin_rot_x
- 0
- origin_rot_y
- -90
- origin_rot_z
- 0
- anim_rot
- door_0
- 172
- [newanim]
- origin_trans
- 1.212
- 6.591
- 0
- origin_rot_x
- 0
- origin_rot_y
- -90
- origin_rot_z
- 0
- anim_rot
- door_0
- -83
muss verändert werden zu
must be changed to
- [mesh]
- DL05\DL05_Tür_V_R.o3d
- [newanim]
- origin_trans
- 1.227
- 6.260
- 0
- origin_rot_x
- 0
- origin_rot_y
- -90
- origin_rot_z
- 0
- anim_rot
- door_3
- 172
- [newanim]
- origin_trans
- 1.212
- 6.591
- 0
- origin_rot_x
- 0
- origin_rot_y
- -90
- origin_rot_z
- 0
- anim_rot
- door_3
- -83
- [mesh]
- DL05\DL05_Tür_V_R_Aussenscheibe.o3d
- [newanim]
- origin_trans
- 1.227
- 6.260
- 0
- origin_rot_x
- 0
- origin_rot_y
- -90
- origin_rot_z
- 0
- anim_rot
- door_3
- 172
- [newanim]
- origin_trans
- 1.212
- 6.591
- 0
- origin_rot_x
- 0
- origin_rot_y
- -90
- origin_rot_z
- 0
- anim_rot
- door_3
- -83
5.
5.
muss verändert werden zu
must be changed to
6. Außerdem muss eine Änderung in der Datei cockpit.osc im Ordner Script durchgeführt werden, damit der Knopf für die erste Tür auch leuchtet wenn ein Flügel gesperrt ist:
6. Something in the file cockpit.osc in the folder Script must be done as well:
muss verändert werden zu
must be changed to